Most guys try not to talk about penis size as this is a painful topic for them. Some guys, even in normal size, want to change the length of their penis. Today, it can be done in a variety of ways, without operations. For example, a vacuum pump helps men lengthen their penis. Before purchasing the device, you should be familiar with the proper use of the pump to enlarge your penis.
Is it possible to enlarge the penis with a pump
First, you need to find out if a vacuum pump helps with an erection and if it is realistic to enlarge your penis with a pump, as some question the effectiveness of this method.
Until recently, such a vacuum pump was only used to improve erections. In fact, with the use of a penis pump, blood flow has increased several times, resulting in an increased erection. Over time, the guys who improved their erections noticed that their penis size became larger after using the device. Therefore, one should not think about whether it is possible to enlarge the penis with a vacuum pump, as this has long been proven.
Many people recommend using this tool to change the size of your penis at home.
Due to the constant stimulation of blood circulation, the epithelial tissue is constantly growing and this lengthens the penis.
Most men who use this tool regularly have been shown to achieve good results. Barely a month later, the penis enlargement pump made it two and a half times thicker. The length also increases, but much more slowly than the width.
How the penis enlargement pump works
If you regularly enlarge your penis with a vacuum pump, blood will flow into the phallic tissue. Due to this, the penis lengthens and thickens. It is no secret that there is a tissue of blood vessels inside the organ. As blood circulation increases, the gradual expansion of these cells begins.
The vacuum created by the device systematically increases blood flow and fills the spongy tissue with it. This leads to an improvement in potency, elongation and enlargement of the skin of the genitals.
Varieties
Most penis enlargement pumps do not differ in construction. From the outside, they resemble an ordinary plastic flask to which a ruler is applied. Penis enlargement pumps are sold with a bulb, which is needed to create the bulb pressure, and with a special seal.
However, some models may have a bleed valve, pressure gauge, or a dedicated pressure control knob.
There are several types of these devices.
Manual
Many men choose to use a hand pump to increase a man’s dignity. This model has a built-in special piston that allows complete removal of air from the flask. Such pumps are the cheapest and are therefore used more often than others.
Automatic
An automatic pump allows your penis to be much larger than a manual one. It is connected to an electric pump powered by batteries. A person does not have to make an effort to use the model. Just adjust the pressure and use a vacuum electric pump.
aquatic
Not all men use water pumps to enlarge their penis, as these models have appeared relatively recently. In this case, water is added to the tank. Such devices are more effective and have virtually no contraindications. One of the benefits of water models is their lifespan.
It is not possible to determine clearly which hydraulic pump is best for penis enlargement, as each of the above models has its own differences.
Election Features
Before performing a penis enlargement with a vacuum pump, you need to find out how to choose the right device. You should follow these recommendations when choosing:
- the penis flask should be 3-4 cm longer than the erect phallus;
- the device should be 2-3 cm wider than the circumference of the penis during erection; For beginners
- , a device with a pear-shaped oxygen pump is recommended;
- The vacuum pump needed for penis enlargement should be made of a reliable material that can achieve a complete seal.
Also consider how much the purchased device will cost. If there are no financial restrictions, you can purchase an automated model right away.
How to make a pump for yourself
If you want, you can make a pump for your penis yourself. The male homemade pump should consist of the following elements:
- Flask. The item is designed to accommodate the penis.
- Pump. Mandatory element used to pump oxygen.
- Tube. In most models, it is used to connect the pump to a flask. However, sometimes you can also find models without tubes. In this case, the structure is monolithic and the pump is attached directly to the flask itself, without the use of auxiliaries.
To create such a tool on your own, follow the instructions below to increase efficiency:
- Use a balloon to make a flask. First, a special hole is made in it into which the penis is inserted. It should not contain gaps, so make sure it is perfectly flat.
- After completing the first hole, continue with the next one. It should be perpendicular to the walls. This hole is created for the installation of the pipe connected to the pump. The width of the hole is determined by the dimensions of the connected hose.
- A pipe is connected to the created hole. It is recommended to use a high density and thick wall hose for this. A hose made of too thin a material will block the air in the bends, which can adversely affect the operation of the device.
- A paper funnel should be placed at the bottom of the cylinder to be used to apply the sealant in the future. The thickness of the funnel should match the width of the erect penis.
- When the sealant is completely dry, you can start connecting the pump. You can use a small aquarium pump or a standard rubber lamp for this.
This tool is sufficient to understand if the pump is enlarging the penis. However, for greater efficiency, it is still recommended to purchase high quality vacuum pumps.
Using the Penis Enlargement Pump
Not every guy knows how to use a penis pump. For proper use of the vacuum pump, men need an instruction that describes the characteristics of using the device.
Before using the penis enlargement device, lubricate the plastic flask with a little lubricant. In this case, I only use non-greasy lubricants to avoid accidentally damaging the flask. When the bulb is completely lubricated, the penis can be inserted. However, it should be positioned to fit snugly against the walls. After that, the air starts to pump out and this leads to the fact that the blood flow gradually increases.
When extending the penis with a pump, hold the flask with one hand and pump out the oxygen with the other with a pear. The hole in the flask should also be completely covered, which contributes to the overall tightness. After a few minutes, you may notice a strong redness on your enlarged penis.
Redness indicates that further increase in erection may be detrimental, so you must allow air into the flask.
If the erection is slightly weakened, the procedure should be repeated. The duration of the device is 20-30 minutes. This device should be used every 2-3 days to treat impotence. However, during the first week, it is recommended to use the pump daily, especially before sex. For some men, it is important that the length of their penis increases just before intercourse. When extending the penis, a special stiffening ring can be used after the pump. It is fixed at the base of the penis and does not allow the erection to disappear quickly.
Contraindications
Before enlarging your penis with a pump, familiarize yourself with the main contraindications. This penis extension machine should not be used:
- patients with infectious urethritis and inflammation;
- Men with thrombosis.
It is therefore advisable to consult an andrologist to perform all necessary examinations and draw conclusions as to whether it is necessary to enlarge the penis with a pump.
Conclusion
Many guys wonder if it is possible to enlarge their penis with their pump. To understand this, you need to be familiar with how the device works and communicate with those who have used it.